Grounding Pillowcase — Setup & Care Guide

← All setup guidesStuck? WhatsApp us · replies within 24–48h

Quick answer: Slide your pillow in with the metal stud facing out, snap the cord onto the stud, plug the adapter into the earth pin, and sleep with your face and neck on it. Two checks prove it: a socket tester confirms the outlet has a live earth; the tester pen confirms the silver conducts — with both tips resting on a silver thread line, not the plain cotton between. Wash weekly, warm (up to 40 °C) or cool, with plain detergent — no softener, bleach, fragrance or essential oils.

By the Naturalive team · Updated 10 September 2026 · Care rules aligned with the Bureau Veritas test reports on this fabric

What's in the box?

  • Grounding Pillowcase — cotton woven with a grid of conductive silver thread
  • Safety Grounding Cord — with a built-in 100 kΩ resistor
  • Safety Adapter — for local 3-pin sockets, earth pin only
  • Conductivity Tester Pen — confirms the silver threads conduct

How do I set up the grounding pillowcase?

  1. Slide the pillow in. The side with the metal stud faces outward, where your head rests. No pillow protector on top — the pillowcase must be the layer your skin touches.
  2. Snap the cord onto the stud until it clicks. Route the cord off the side of the bed so it doesn't pull.
  3. Plug in. Cord into the Safety Adapter, adapter into the wall socket. Only the earth pin makes contact; the socket doesn't need to be on.
  4. Sleep on it. Face, cheek and neck make the contact, spanning many silver lines at once. For two pillows, use two pillowcases; each needs its own cord.

How do I check it's working?

Two checks, each proving one half.

  1. The socket — is the earth there? Plug a socket tester (in the Tester Kit) into the wall socket and match its lights to the printed legend. Only this check proves the earth. Once per socket.
  2. The pillowcase — does the silver conduct? The silver runs through the cotton as a fine grid of thread lines. The pen lights only when both tips rest directly on a silver line; on the plain cotton between it stays dark, and that's normal. Find a line, lay both tips along it, hold still: it lights, the silver conducts. Monthly, and after any new detergent or skincare product.
  3. Both together — live earth at the wall, conducting pillowcase snapped and plugged into it — is a grounded pillow.

Where to put the pen, photographed:

Correct way to test grounding fabric: both tips of the tester pen resting on a silver thread line, pen lit
Right. Both tips on a silver line — the pen lights.
Close-up of the tester pen tips aligned along a silver thread line
Close up. Tips aligned along the line, not across the cotton.
Wrong way to test grounding fabric: tester pen tips on the plain cotton between silver lines, pen dark
Wrong. Tips on the cotton between lines — dark, and normal.

Want proof on your own body? A multimeter on AC volts: one probe to the earth through the adapter, one in your hand. Note the reading, then rest your cheek on the connected pillowcase — the number falls toward zero. That drop is grounding, measured; message us and we'll walk you through it.

How do I wash it?

A pillowcase meets skincare every night, so it needs washing weekly — more often than a sheet.

  • Machine-wash warm (up to 40 °C) or cool — never hot.
  • Plain liquid detergent, free of softener, bleach, fragrance, essential oils, optical brighteners and dyes.
  • Line-dry or tumble low. No dryer sheets.
  • Night creams, serums and hair oils at least an hour before bed; oil-based products coat silver fastest of all.

The four things that kill conductivity: fabric softener, bleach, fragrance, essential oils. A correct wash usually restores a pillowcase that has "stopped working." Send us the label if you're unsure.

What if the pen doesn't light?

  1. Are both tips on a silver line? The reason nine times out of ten. Find a visible silver thread, align both tips along it, hold still a second.
  2. The wash and the skincare. Still dark on a line? Check both for the four. Wash twice in plain detergent, dry, test on a line again.
  3. The stud. Touch the pen to the metal stud. Lit there but not on any line means the threads are coated — back to step 2.
  4. The pen. If it lights on nothing, not even the stud, message us; we'll replace it.

What if the socket tester shows a fault?

Use another socket. If every socket fails, send us a photo; a grounding rod is the usual answer. If both checks pass and you still doubt the link between them, reseat the snap and the adapter; a continuity tester checks the whole chain.

Thunderstorms: when thunder is close, unplug the cord until the storm passes — about an hour after the last thunder — the way you might a laptop, then plug back in. Why, and why it's a habit rather than a worry, in our FAQ.

Warranty and returns

One-year warranty on defects. Connection guaranteed for 60 days — if it can't be grounded, we test it with you and refund in full. Unopened items return within 60 days, postage on us in Singapore and Malaysia; a slept-on pillowcase can't return for change of mind. Full policy →

Frequently asked questions

Why does the pen only light in some spots?

Because only the silver thread lines conduct; the cotton between them doesn't. The pen needs both tips on a line. Your face doesn't have that problem — a cheek on the pillowcase spans many lines at once.

Does the pen prove I'm grounded?

No. It proves the silver conducts. The socket tester proves the earth is present at the wall. Together they're the practical proof; a multimeter reading of your body voltage dropping is the definitive one.

Is a pillowcase enough, or do I need a sheet?

The pillowcase is the cheapest honest way to try grounding, and face-and-neck contact all night is real contact. A sheet gives far more skin area. Many start with the pillowcase and add a sheet later.

Can I use a pillow protector?

Under the pillowcase, yes. Over it, no — nothing can sit between your skin and the weave.

Something not right?

WhatsApp +65 8924 5100 with a photo. Pen on a silver line, socket, wash, snap — we check them with you in that order, and if it cannot be grounded we refund in full.

More guides

Every product's setup guide · FAQ · Lab reports & certificates